Walk-in-Interview for L&T-S&L (Sargent & Lundy) for Design Professionals

L&T-Sargent & Lundy is a world-class plant engineering and design center, having engineered over 100 GW of projects over the last three decades across geographies. Explore diverse roles in large-scale international projects, spanning gas-based combined cycle, renewable & hybrid, SWRO, waste-to-energy, geothermal, and re-powering thermal projects.

They are inviting experienced professionals with an M.Tech/M.E. / B.Tech/B.E./Diploma qualification for the following roles:

  • Sr. Engineer/Designer (4-6 years)
  • Asst. Manager/Manager (7-14 years)
  • Lead Engineer/Domain Expert / Lead Designer (15-20 years)

System / Equipment / Physical Design Engineering

Mechanical System / Equipment

  • Main/Reheat Steam, Feed Water, Condensate, Bypass, Steam Extraction & Drain System
  • Utility/BOP, Circulating Water, Water Treatment, Compressed Air, Fuel Gas / Fuel Oil, Fire, HVAC, Material Handling
  • Gas Turbine/Steam Turbine, HRSG/Boiler, Condenser, Heater, Boiler Feed Pump, Condensate Extraction Pump, CW Pump, Cooling Tower, Compressor

Piping (Stress and Layout)

  • Piping – Stress, Material and Support Engineering
  • Plot/Site Layout, Equipment & Piping GADS, ISOs, Support, MTOS

Electrical System / Equipment

  • .LV/MV/EHV, Generator and Aux, Transformer, Cable Sizing, AIS/GIS, Transmission Line and Power Systems Studies, SLD
  • Electrical Equipment Layout, Cable Raceway Layout, Lighting and Earthing, MTO

Civil & Structural

  • Structural Steel & RCC Building / Structure, Dynamic / Static Equipment Foundation, Geotechnical, Area Grading, Roads & Drainage
  • Structural Steel and Reinforced Concrete Detailing

Instrumentation & Control

  • Instruments, Control Valves, DCS, PLC, and Logic Diagrams • Control/Electronic Room Layout, Installation Schemes

Renewable Energy

  • Solar/Wind/ Battery Storage/Hybrid

Software Proficiency Required

  • GATECYCLE/GT PRO/Steam PRO, CAESAR-II/ROHR, PIPENET/AFT, HAP/Elite
  • 3D CAD tools e.g. SP3D/PDS/PDMS/E3D, Revit
  • ETAP, PSCAD, PSSE, CDEGS, DIALux
  • PVSyt, Primavera, PVcase
  • STAAD-PRO, ETABS, SAFE, SAP, PLS-CADD, TEKLA, Revit, Civil 3D, GeoStudio, PLAXIS
  • AutoCAD, Microstation, MS Office, Power BI
READ  Walk-In Interview of TOYO MODEC OFS INDIA PRIVATE LIMITED

Job Locations

  • Electrical domain: Kolkata and Vadodara
  • All other domains: Vadodara

Walk-in-Interview Details

Walk-in interviews at Location:

1. Bengaluru
L&T Technology Services Ltd,
Tower S1, Ground Floor, L&T Tech Park
Near Phoenix Mall of Asia
Bellary Road, Bengaluru-560 092

2. Pune
Larsen & Toubro Limited – Pune,
L&T House, 191/1, Dhole Patil Road, Pune – 411 001

3. Kolkata
Taj Taal Kutir, Kolkata
Eco park, Plot No.: IIE/65, Action Area-ll,
New town, Rajarhat, Kolkata – 700 156

Walk-in-Interview Date: 24th August, 2024 (Saturday); 9:30 a.m. onwards

Note to Candidates:

  • Please bring your resume to the interview. Write the position and role applied for at the top of the page
  • If you are not able to attend the walk-in interview, please send your resume to HRService@LntsnL.com
  • L&T provides equal employment opportunities to all applicants for employment and prohibits discrimination
  • The L&T Group of Companies does not charge candidates any fees at any stage of recruitment.
  • Report any request for fees to us at infodesk@larsentoubro.com.
  • Elevate your professional journey with L&T-Sargent & Lundy Limited!

Refer to the advertisement below:

L&T-S&L Walk-in Interview at Bengaluru, Pune and Kolkata
L&T-S&L Walk-in Interview at Bengaluru, Pune and Kolkata

Anup Kumar Dey

I am Anup Kumar Dey, a Piping Engineer with more than 19 years of experience.

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Posts